JConcepts A2R "A-One Racer 2" 1/10 Touring Car Body (Clear) (190mm) (Light Weight)
A-pillar rails are extended over the hood to strengthening the front wheel well and to providing air deflection right over the nose. The front windshield is tucked back inside the rails and connected to the aggressive roofline giving this body a very distinctive shape. Behind the front wheel well and in front of the rear wheel well is a definitive edge that strengthens the openings and also provides better race posture. A hard edge runs the bottom of the rocker-panel providing more grit to the design while also providing extra front to rear rigidity.
The rear section of this body has plenty of deck overhang. This rear overhang is a very important part of the body which controls down-force and provides the placement for the rear wing. A small built-in spoiler is located at the tail end of the body to help stabilize the car at high-speed. To complete the look the bubbled roof profile and minimally structured greenhouse area allows the body to blast through high-speed sections.
Included in each body set, a JConcepts A-One decal sheet and paint mask for all windows. The rear wing option is light-weight and high-downforce with separate side-dams for the ultimate stability. To attach the rear wing, 3mm mounting hardware and plastic nuts are included to complete the light-weight assembly. As always, each body set is backed with JConcepts customer support and racing heritage.
Race, testing and event history
Several versions of the A2R hit the track in the later stages of 2020 with driving by Paul Wynn, Felix Law and Dave Vera. In an all pink paint scheme, Dave Vera took to the track for round 1 of the Florida State Electric Auto Racers Association event and swept the 17.5 and modified touring car classes. The A2R had serious lift-off in the competitive hands of Felix Law and continued the winning ways in Round 2, 3 and 4 of the series dominating a 2021 series.
Specifications
The A2R body is built for all 190mm width touring car vehicles and was designed to meet all the ROAR “global body spec” rules. Standard thickness is most comparable to all sturdy racing bodies on the market. Light-weight is a thinner gauge material, most often used on the world racing scene for the most experienced or weight-conscious racers. The rear wing is 182mm wide and includes side-dams attachable with double sided tape (not included).
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Features:
- JConcepts, A2R design fit and function
- Lightweight design
- Laid-back front-end, extended A-pillar rails
- Minimally structured greenhouse
- Deck over-hang with blended wing stanchions
- Rear wing option included with side-dams
- 3mm wing mounting hardware with plastic light-weight nuts
- JConcepts A-One decal sheet with window mask
- ROAR approved body
- One clear lightweight "A-One Racer 2" 1/10 touring car body
- 3mm wing mounting hardware with plastic light-weight nuts
- JConcepts A2R decal sheet with window mask